FRONT MOUNT- THIS 7 PIECE UNIT HAS TWO FULLY ADJUSTABLE PIVOTING KNUCKLES WITH 35 TINY INTERLOCKING METAL TEETH THAT MATE WITH 35 TEETH ON THE 2 UPPER AND 2 LOWER ARM CONNECTIONS. THAT MEANS THAT EVERY JOINT ON THE V-BAR HAS 70 METAL TEETH....4 JOINTS = 280 TEETH ON EACH V-BAR. THE TWO END KNUCKLES ARE QUICK DISCONNECTS WITH STAINLESS STEEL PINS. A SIMPLE HALF TURN WILL QUICKLY REMOVE YOUR RODS FOR STORAGE. THE MIDDLE BRACKET IS MACHINED TO ATTACH TO THE FRONT OF YOUR BOW WITH ANY QUICK DISCONNECT, UP TO 1" IN DIAMETER (QUICK DISCONNECT NOT INCLUDED-ORDER SEPARATELY) OR FRONT ROD. IN ADDITION, THERE ARE CALIBRATION MARKS ON EVERY JOINT SO YOU CAN MICRO ADJUST THEM.
REAR MOUNT- This 7 piece unit has two fully adjustable pivoting knuckles with 35 tiny interlocking METAL teeth that mate with 35 teeth on the 2 upper AND 2 lower arm connections. That means that every joint on the V-bar has 70 METAL teeth....4 joints = 280 teeth on each V-bar. The two end knuckles are Quick Disconnects with stainless steel pins. A simple half turn will quickly remove your rods for storage. The middle bracket is machined to attach to the REAR of your bow. In addition, there are CALIBRATION MARKS on every joint so you can MICRO ADJUST them.